This chuck can be used to lock punches up to 100 mm in diameter, enabling washers or gaskets to be cut concentrically in a single operation.
This chuck can be used in 2 different ways:
- mounted on a press, with the chuck attached to the moving part of the press. This chuck can be screwed onto the JLBM53PRESSE adapter for EMG manual presses. Caution: check the power required to use this chuck.
- flat by cutting with a mallet on the cutting edge of the hollow punch.
The hammer cutting method is not possible with this chuck, its weight being too heavy.
Made in France
Weight | 2,4 kg |
---|